Wrong part for Whirlpool

[hdtramp]

Model Number: GU2200XTSS3
Brand: Whirlpool
Age: More than 10 years

I am trying to change out an impeller kit 8193951A for my Whirlpool dishwasher because the fins for the food chopper were worn off. I ordered the kit from 3 different places and they all came with the wrong seal. These are packaged from Whirlpool and all the places I ordered from all agree the part is wrong, not even close. The parts schematics and the pictures of the kit all show the part I removed, but the kits have a considerably smaller seal and different inner diameter. I tried to contact Whirlpool but they hang up or transfer me to a different department only to get cut off in the process. Was wondering if anyone else is dealing with this problem and if there is a solution. I hate to junk the dishwasher because of a cheap seal, it is a good washer. I will try to use the old seal, but afraid of it leaking. Any info would be appreciated, thanks.

[Doc Ryan]

Whirlpool has some bad stock the impeller kit that contain the incorrect seal. Until they correct the bad stock of that part, you could order the pump & motor assembly.

This is the pump and motor assembly for your model dishwasher:

WPW10780877 - Pump & Motor Assembly

[hdtramp]

Whirlpool has some bad stock the impeller kit that contain the incorrect seal. Until they correct the bad stock of that part, you could order the pump & motor assembly.

This is the pump and motor assembly for your model dishwasher:

WPW10780877 - Pump & Motor Assembly

I really don't want to spend another $300+ for something I don't need when all I really need is $2 seal.