Speed Queen Washer suddenly won't Rinse

[proton32060]

Model Number: AWN412SP111TW01
Brand: Speed Queen
Age: More than 10 years

I have a problem with a Speed Queen washer.
I'm sorry, I realized after Posting this it is in the wrong forum but I can't find a way to delete the Post and move it where it belongs.

I bought it used because the washer and dryer are going in my office and my wife wanted the exact thing in the office she has at home.

Here is the problem.

I put it in and it worked fine.

I let it soak overnight with OxiClean and let it finish the cycle and everything worked.

I ran it about 5 times testing it and adjusting the water level.

Now when it hits the rinse cycle the Timer stops.

It won’t do the Rinse Cycle on any of the settings on the timer.

If you continue advancing it manually it will go into the spin cycle, but it will not fill to rinse on any of the Timer options, even it you advance it manually.

It fills fine, goes through the wash cycle and draining fine, but it will not fill to Rinse under any circumstances in spite of the fact it worked until just now.

Yes, I know it is probably the Timer but it makes no sense that none of the settings ( Regular, Perm Press, Delicate) on it will Rinse, even it you set it manually.

I admit I don’t fully understand how it works but I do know it is a simple mechanical timer that has a series of contacts it runs through to complete a cycle. I could see it not filling to Rinse on one of the options ( bad contacts) but it will not fill to rinse on any of the options.

Sorry for being wordy but you guys understand these machines better than I do.

So simply, could it be anything else but the Timer?

And does it make sense that it will not Rinse on any of the washing options on the timer and the Timer does run until it gets to Rinse and then simply stops, won't advance further, and won't rinse even if you turn it slowly by hand.