Model Number: 911.95582992
Brand: Sears Kenmore
Age: 6-10 years
I have a kenmore range, the top burners work but the clock display and buttons won't light up or do anything. Is it the control board that needs to be replaced?
Model Number: 911.95582992
Brand: Sears Kenmore
Age: 6-10 years
I have a kenmore range, the top burners work but the clock display and buttons won't light up or do anything. Is it the control board that needs to be replaced?
The first thing to do would be to pull out the range and unplug it and do a voltage test at the outlet. You should see approximately 240 volts between both of the "hot" terminals. You should get approximately 120 volts between each of the "hot" terminals and ground. If that checks out ok then pull off the two back panels and look for any burnt wiring or burn spots on the control board. If the voltage going to the range checks out and all the wiring going to the circuit board is ok then it has to the control board that is bad.
This is the clock control board for your range:
Clock Control Board - WB50T10042
This is the clock plate for your range. The old ones don't always like to come off without breaking.
Clock Plate (White) - WB27T10107
Ryan
PartsDr.com - Discount Appliance Parts & Accessories
Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.
Check out our Repair Videos on Youtube
"Like" Parts Dr on Facebook
Follow Parts Dr on Twitter
It looks like I will be ordering a new control board.