Results 1 to 4 of 4

Thread: Sears DW doesn't complete cycle; 6 flashes, then one

  1. #1

    Sears DW doesn't complete cycle; 6 flashes, then one

    Model Number: 665.13189K800
    Brand: Sears Kenmore
    Age: More than 10 years

    Sears 665.13189K800 DW doesn't complete cycle; 6 flashes, then one. Same on different wash cycles

    Sometimes doesn't completely drain. Drains if I press Drain/Cancel button. YouTube vids suggest either:

    Circ Pump
    Drain pump
    water valve, or
    Circuit Board

    Float valve seems fine.

    Last night, I had to do a reset on the control panel.

    Thanks,

    Reid
    Last edited by rthaler@yahoo.com; 01-14-2025 at 11:19 AM.

  2. #2
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,998
    Hi Reid, you can download the tech sheet for your dishwasher here.

    If it is error code 6-1. This is what is listed:

    Wash Motor No Communication
    1. Run Service Diagnostics and confirm if other loads
    operate. If so go to step 2.
    2. Unplug dishwasher or disconnect power.
    3. Replace wash motor.
    4. Replace all parts and panels.
    5. Plug in dishwasher or reconnect power.
    6. If no other loads turn on go to step 6.
    7. Unplug dishwasher or disconnect power.
    8. Replace control.

    Let me know what you find.

    Pump & Motor Assembly - W10168823 (PD00003987)
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

  3. #3
    Quote Originally Posted by Doc Ryan View Post
    Hi Reid, you can download the tech sheet for your dishwasher here.

    If it is error code 6-1. This is what is listed:

    Wash Motor No Communication
    1. Run Service Diagnostics and confirm if other loads
    operate. If so go to step 2.
    2. Unplug dishwasher or disconnect power.
    3. Replace wash motor.
    4. Replace all parts and panels.
    5. Plug in dishwasher or reconnect power.
    6. If no other loads turn on go to step 6.
    7. Unplug dishwasher or disconnect power.
    8. Replace control.

    Let me know what you find.

    Pump & Motor Assembly - W10168823 (PD00003987)
    The washer motor is working, so I don't think that's the issue.

  4. #4
    Admin/Technician Doc Ryan's Avatar
    Join Date
    Mar 2011
    Location
    South Dakota
    Posts
    4,998
    Try going through the troubleshooting information listed in the tech sheet to see if you can narrow down the issue. If the error code is 6-1, you will want to check the things that are listed to troubleshoot that specific error even if the circulation pump seems to be working.
    Ryan

    PartsDr.com
    - Discount Appliance Parts & Accessories


    Please help keep our repair forum FREE by purchasing your replacement parts from our online store. Thank you for your support.

    Check out our Repair Videos on Youtube

    "Like" Parts Dr on Facebook


    Follow Parts Dr on Twitter

Similar Threads

  1. Dry continues to run after cycle is complete
    By Willyo in forum Dryer Repair
    Replies: 0
    Last Post: 09-12-2022, 08:32 PM
  2. Ten hours to complete cycle
    By swp123 in forum Washer Repair
    Replies: 0
    Last Post: 07-12-2020, 06:46 PM
  3. Washing machine does not complete cycle
    By Totalrebel142 in forum Washer Repair
    Replies: 0
    Last Post: 04-11-2020, 02:27 AM
  4. Washer will not complete cycle
    By fnseljoe in forum Washer Repair
    Replies: 0
    Last Post: 09-07-2019, 05:20 PM
  5. Replies: 1
    Last Post: 09-08-2016, 12:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •